You are viewing documentation for an outdated version of Debezium.
If you want to view the latest stable version of this page, please go here.

Monitoring Debezium

You can use the JMX metrics provided by Zookeeper and Kafka to monitor Debezium. To use these metrics, you must enable them when you start the Zookeeper, Kafka, and Kafka Connect services. Enabling JMX involves setting the correct environment variables. The environment variables that you must set depend on whether you are running Zookeeper, Kafka, and Kafka Connect in a local installation or in Docker containers.

If you are running multiple services on the same machine, be sure to use distinct JMX ports for each service.

Metrics for monitoring Debezium connectors

In addition to the built-in support for JMX metrics in Kafka, Zookeeper, and Kafka Connect, each connector provides additional metrics that you can use to monitor their activities.

Enabling JMX in local installations

With Zookeeper, Kafka, and Kafka Connect, you enable JMX by setting the appropriate environment variables when you start each service.

Zookeeper JMX environment variables

Zookeeper has built-in support for JMX. When running Zookeeper using a local installation, the zkServer.sh script recognizes the following environment variables:

JMXPORT

Enables JMX and specifies the port number that will be used for JMX. The value is used to specify the JVM parameter -Dcom.sun.management.jmxremote.port=$JMXPORT.

JMXAUTH

Whether JMX clients must use password authentication when connecting. Must be either true or false. The default is false. The value is used to specify the JVM parameter -Dcom.sun.management.jmxremote.authenticate=$JMXAUTH.

JMXSSL

Whether JMX clients connect using SSL/TLS. Must be either true or false. The default is false. The value is used to specify the JVM parameter -Dcom.sun.management.jmxremote.ssl=$JMXSSL.

JMXLOG4J

Whether the Log4J JMX MBeans should be disabled. Must be either true (default) or false. The default is true. The value is used to specify the JVM parameter -Dzookeeper.jmx.log4j.disable=$JMXLOG4J.

Kafka JMX environment variables

When running Kafka using a local installation, the kafka-server-start.sh script recognizes the following environment variables:

JMX_PORT

Enables JMX and specifies the port number that will be used for JMX. The value is used to specify the JVM parameter -Dcom.sun.management.jmxremote.port=$JMX_PORT.

KAFKA_JMX_OPTS

The JMX options, which are passed directly to the JVM during startup. The default options are:

  • -Dcom.sun.management.jmxremote

  • -Dcom.sun.management.jmxremote.authenticate=false

  • -Dcom.sun.management.jmxremote.ssl=false

Kafka Connect JMX environment variables

When running Kafka using a local installation, the connect-distributed.sh script recognizes the following environment variables:

JMX_PORT

Enables JMX and specifies the port number that will be used for JMX. The value is used to specify the JVM parameter -Dcom.sun.management.jmxremote.port=$JMX_PORT.

KAFKA_JMX_OPTS

The JMX options, which are passed directly to the JVM during startup. The default options are:

  • -Dcom.sun.management.jmxremote

  • -Dcom.sun.management.jmxremote.authenticate=false

  • -Dcom.sun.management.jmxremote.ssl=false

Enabling JMX in Docker

If you are running Zookeeper, Kafka, and Kafka Connect in Docker containers, enabling JMX requires several additional environment variables that are not typically needed when running on a local machine. This is because the JVM requires the host name to which it will advertise itself to JMX clients. Thus, Debezium’s Docker images for Zookeeper, Kafka, and Kafka Connect use several environment variables to enable and configure JMX. Most of the environment variables are the same for all of the images, but there are some minor differences.

Zookeeper JMX environment variables in Docker

The debezium/zookeeper image recognizes the following JMX-related environment variables:

JMXPORT (Required)

The port number that will be used for JMX. The value is used to specify the following JVM parameters:

  • -Dcom.sun.management.jmxremote.port=$JMXPORT

  • -Dcom.sun.management.jmxremote.rmi.port=$JMXPORT

JMXHOST (Required)

The IP address or resolvable host name of the Docker host, which JMX uses to construct a URL sent to the JMX client. A value of localhost or 127.0.0.1 will not work. Typically, 0.0.0.0 can be used. The value is used to specify the JVM parameter -Djava.rmi.server.hostname=$JMXHOST.

JMXAUTH

Whether JMX clients must use password authentication when connecting. Must be either true or false. The default is false. The value is used to specify the JVM parameter -Dcom.sun.management.jmxremote.authenticate=$JMXAUTH.

JMXSSL

Whether JMX clients connect using SSL/TLS. Must be either true or false. The default is false. The value is used to specify the JVM parameter -Dcom.sun.management.jmxremote.ssl=$JMXSSL.

JMXLOG4J

Whether the Log4J JMX MBeans should be disabled. Must be either true or false. The default is true. The value is used to specify the JVM parameter -Dzookeeper.jmx.log4j.disable=$JMXLOG4J.

Example 1. Enabling JMX in a Zookeeper Docker container

The following example Docker command starts a container using the debezium/zookeeper image with values for the JMXPORT and JMXHOST environment variables, and maps the Docker host’s port 9010 to the container’s JMX port:

$ docker run -it --rm --name zookeeper -p 2181:2181 -p 2888:2888 -p 3888:3888 -p 9010:9010 -e JMXPORT=9010 -e JMXHOST=10.0.1.10 debezium/zookeeper:latest

Kafka JMX environment variables in Docker

The debezium/kafka image recognizes the following JMX-related environment variables:

JMXPORT (Required)

The port number that will be used for JMX. The value is used to specify the following JVM parameters:

  • -Dcom.sun.management.jmxremote.port=$JMXPORT

  • -Dcom.sun.management.jmxremote.rmi.port=$JMXPORT

JMXHOST (Required)

The IP address or resolvable host name of the Docker host, which JMX uses to construct a URL sent to the JMX client. A value of localhost or 127.0.0.1 will not work. Typically, 0.0.0.0 can be used. The value is used to specify the JVM parameter -Djava.rmi.server.hostname=$JMXHOST.

JMXAUTH

Whether JMX clients must use password authentication when connecting. Must be either true or false. The default is false. The value is used to specify the JVM parameter -Dcom.sun.management.jmxremote.authenticate=$JMXAUTH.

JMXSSL

Whether JMX clients connect using SSL/TLS. Must be either true or false. The default is false. The value is used to specify the JVM parameter -Dcom.sun.management.jmxremote.ssl=$JMXSSL.

Example 2. Enabling JMX in a Kafka Docker container

The following example Docker command starts a container using the debezium/kafka image with values for the JMXPORT and HOST_NAME environment variables, and maps the Docker host’s port 9011 to the container’s JMX port:

$ docker run -it --rm --name kafka -p 9092:9092 -p 9011:9011 -e JMXPORT=9011 -e JMXHOST=10.0.1.10 --link zookeeper:zookeeper debezium/kafka:latest

Kafka Connect JMX environment variables in Docker

The debezium/connect image recognizes the following JMX-related environment variables:

JMXPORT (Required)

The port number that will be used for JMX. The value is used to specify the following JVM parameters:

  • -Dcom.sun.management.jmxremote.port=$JMXPORT

  • -Dcom.sun.management.jmxremote.rmi.port=$JMXPORT

JMXHOST (Required)

The IP address or resolvable host name of the Docker host, which JMX uses to construct a URL sent to the JMX client. A value of localhost or 127.0.0.1 will not work. Typically, 0.0.0.0 can be used. The value is used to specify the JVM parameter -Djava.rmi.server.hostname=$JMXHOST.

JMXAUTH

Whether JMX clients must use password authentication when connecting. Must be either true or false. The default is false. The value is used to specify the JVM parameter -Dcom.sun.management.jmxremote.authenticate=$JMXAUTH.

JMXSSL

Whether JMX clients connect using SSL/TLS. Must be either true or false. The default is false. The value is used to specify the JVM parameter -Dcom.sun.management.jmxremote.ssl=$JMXSSL.

Example 3. Enabling JMX in a Kafka Connect Docker container

The following example Docker command starts a container using the debezium/connect image with values for the JMXPORT and JMXHOST environment variables, and maps the Docker host’s port 9012 to the container’s JMX port:

$ docker run -it --rm --name connect \
  -p 8083:8083 -p 9012:9012 \
  -e JMXPORT=9012 -e JMXHOST=10.0.1.10 \
  -e GROUP_ID=1 \
  -e CONFIG_STORAGE_TOPIC=my_connect_configs \
  -e OFFSET_STORAGE_TOPIC=my_connect_offsets \
  -e STATUS_STORAGE_TOPIC=my_connect_statuses \
  --link zookeeper:zookeeper \
  --link kafka:kafka \
  --link mysql:mysql \
  debezium/connect:latest

Using Prometheus and Grafana

The metrics exposed by Debezium and Kafka can be exported and displayed with Prometheus and Grafana. You can find an example for the required configuration and example dashboards for different connectors in the Debezium examples repository.

These dashboards are not part of Debezium itself and are maintained on a best-effort basis.